ASST3: Virtual Memory

Table of Contents


Due Dates and Mark Distribution

Due Date & Time: 10:00 AM Monday 27th April

Marks: The base assignment is worth 30 marks (of the 100 available for the class mark component of the course)

The 2% per day bonus for each day early applies, capped at 10%, as per course outline.

Students can do the advanced part with the permission of the lecturer, and only if basic assignment is completed a week prior to the deadline. Obtained bonus marks can make up for any shortfall in the class mark component, up to a maximum of 5 marks for this assignment.

There are familiarisation questions in your week 9 tutorial. Please answer the questions and bring them to your tutorial. Feel free to ask any assignment related questions need to clarify your understanding.


In this assignment you will implement the virtual memory sub-system of OS/161. The existing VM implementation in OS/161, dumbvm, is a minimal implementation with a number of shortcomings. In this assignment you will adapt OS/161 to take full advantage of the simulated hardware by implementing management of the MIPS software-managed Translation Lookaside Buffer (TLB). You will write the code to manage this TLB.

The System/161 TLB

In the System/161 machine, each TLB entry includes a 20-bit virtual page number and a 20-bit physical page number as well as the following five fields:

  • global: 1 bit; if set, ignore the PID bits in the TLB.
  • valid: 1 bit; set if the TLB entry contains a valid translation.
  • dirty: 1 bit; enables writing to the page referenced by the entry; if this bit is 0, the page is only accessible for reading.
  • nocache: 1 bit; unused in System/161. In a real processor, indicates that the hardware cache will be disabled when accessing this page.
  • asid: 6 bits; a context or address space ID that can be used to allow entries to remain in the TLB after a context switch.

All these bits/values are maintained by the operating system (i.e. your code). When the valid bit is set, the TLB entry contains a valid translation. This implies that the virtual page is present in physical memory. A TLB miss occurs when no TLB entry can be found with a matching virtual page and address space ID (unless the global bit is set in which case the address space ID is ignored) and a valid bit that is set.

For this assignment, you may largely ignore the ASID field set to zero for your TLB entries. Note, however, that you must then flush the TLB on a context switch (why?).

The System/161 Virtual Address Space Map

The MIPS divides its address space into several regions that have hardwired properties. These are:

  • kseg2, TLB-mapped cacheable kernel space
  • kseg1, direct-mapped uncached kernel space
  • kseg0, direct-mapped cached kernel space
  • kuseg, TLB-mapped cacheable user space

Both direct-mapped segments map to the first 512 megabytes of the physical address space.

The top of kuseg is 0x80000000. The top of kseg0 is 0xa0000000, and the top of kseg1 is 0xc0000000.

The memory map thus looks like this:

Address Segment Special Properties
0xffffffff kseg2  
0xbfffffff kseg1  
0xbfc00180 Exception address if BEV set.
0xbfc00100 UTLB exception address if BEV set.
0xbfc00000 Execution begins here after processor reset.
0x9fffffff kseg0  
0x80000080 Exception address if BEV not set.
0x80000000 UTLB exception address if BEV not set.
0x7fffffff kuseg  

Setting Up Assignment 3

We assume after ASST0, ASST1, and ASST2 that you now have some familiarity with setting up for OS/161 development. If you need more detail, refer back to ASST0.

Clone the ASST3 source repository from Note: replace XXX with your 3 digit group number.

% cd ~/cs3231
% git clone asst3-src

Note: The gitlab repository is shared between you and your partner. You can both push and pull changes to and from the repository to cooperate on the assignment.

Configure OS/161 for Assignment 3

Remember to set your PATH environment variable as in previous assignments (e.g. run the 3231 command).

Before proceeding further, configure your new sources, and build and install the user-level libraries and binaries.

% cd ~/cs3231/asst3-src
% ./configure
% bmake
% bmake install

You have to reconfigure your kernel before you can use the framework provided to do this assignment. The procedure for configuring a kernel is the same as before, except you will use the ASST3 configuration file:

% cd ~/cs3231/asst3-src/kern/conf
% ./config ASST3

You should now see an ASST3 directory in the compile directory.

Building for ASST3

When you built OS/161 for ASST0, you ran bmake from compile/ASST0. When you built for ASST1, you ran bmake from compile/ASST1 ... you can probably see where this is heading:

% cd ../compile/ASST3
% bmake depend
% bmake
% bmake install

If you now run the kernel as you did for previous assignments, you should get to the menu prompt. If you try and run a program, it will fail with a message about an unimplemented feature (the failure is due to the unimplemented as_* functions that you must write). For example, run p /bin/true at the OS/161 prompt to run the program /bin/true in ~/cs3231/root.

OS/161 kernel [? for menu]: p /bin/true
Running program /bin/true failed: Function not implemented
Program (pid 2) exited with status 1
Operation took 0.173469806 seconds
OS/161 kernel [? for menu]:

Note: If you don't have a sys161.conf file, you can use the one from ASST1.

The simplest way to install it is as follows:

% cd ~/cs3231/root
% wget -O sys161.conf

You are now ready to start the assignment.

Coding Assignment

This assignment involves designing and implementing a number of data-structures and the functions that manipulate them. Before you start, you should work out what data you need to keep track of, and what operations are required.

Address Space Management

OS/161 has an address space data type that encapsulates the book-keeping needed to describe an address space: the struct addrspace. To enable OS/161 to interact with your VM implementation, you will need to implement the functions in kern/vm/addrspace.c and potentialy modify the data type. The semantics of these functions is documented in kern/include/addrspace.h.

Note: You may use a fixed-size stack region (say 16 pages) for each process.

Address Translation

The main goal for this assignment is to provide virtual memory translation for user programs. To do this, you will need to implement a TLB refill handler. You will also need to implement a page table. For this assignment, you will implement a 2-level hierarchical page table.

Note that a hierarchical page table is a lazy data-structure. This means that the contents of the page table, including the second-level nodes in the hierarchy, are only allocated when they are needed. You may find allocating the required pages at load time helps you start your assignment, however, your final solution should allocate pages only when a page-fault occurs.

The following questions may assist you in designing the contents of your page table

  • What information do you need to store for each page?
  • How does the page table get populated?

Note: Applications expect pages to contain zeros when first used. This implies that newly allocated frames that are used to back pages should be zero-filled prior to mapping

Testing and Debugging Your Assignment

To test this assignment, you should run a process that requires more virtual memory than the TLB can map at any one time. You should also ensure that touching memory not in a valid region will raise an exception. The huge and faulter tests in testbin may be useful. See the Wiki for more options.

Apart from GDB, you may also find the trace161 command useful. trace161 will run the simulator with tracing, for example

% trace161 -t t -f outfile kernel

will record all TLB accesses in outfile.

Don't use kprintf() for vm_fault() debugging. See Wiki for more info.


To implement a page table, have a close look at the dumbvm implementation, especially vm_fault(). Although it is simple, you should get an idea on how to approach the rest of the assignment.

One approach to implementing the assignment is in the following order:

  • Understand how the page table works, and its relationship with the TLB.
  • Understand the specification and the supplied code.
  • Work out a basic design for your page table implementation.
  • Modify kern/vm/vm.c to insert , lookup, and update page table entries, and keep the TLB consistent with the page table.
  • Implement the TLB exception handlers in vm.c using your page table.
  • Implement the functions in kern/vm/addrspace.c that are required for basic functionality (e.g. as_create(), as_prepare_load(), etc.). Allocating user pages in as_define_region() may also simplify your assignment, however good solution allocate pages in vm_fault().
  • Test and debug this. Use the debugger!

Note: Interrupts should be disabled when writing to the TLB, see dumbvm for an example. Otherwise, unexpected concurrency issues can occur.

as_activate() and as_deactivate() can be copied from dumbvm.

FAQ and Gotchas

Don't forget to look at for an up to date list of potential issues you might encounter.

Basic Assignment Submission

The submission instructions are available on the Wiki. Like previous assignments, you will be submitting the git repository bundle via CSE's give system. For ASST3, the submission system will do a test build and run a simple test to confirm your bundle at least compiles.

Warning! Don't ignore the submission system! If your submission fails the submission process, you may not receive any marks.

Warning! Don't forget to commit your changes prior to generating your bundle.

To submit your bundle:

% cd ~
% give cs3231 asst3 asst3.bundle

You're now done.

Even though the generated bundle should represent all the changes you have made to the supplied code, occasionally students do something "ingenious". So always keep your git repository so that you may recover your assignment should something go wrong.

Advanced Assignment

The advanced assignment consists of a student-chosen subset of the problems below. The total marks available are capped at 5 marks.

Students can do the advanced part with the permission of the lecturer, and only if basic assignment is completed a week prior to the deadline.

Given you're doing the advanced version of the assignment, I'm assuming you are competent with managing your git repository and don't need detailed directions. We expect you to work on a specific branch in your repository to both build upon your existing assignment, while keeping your advanced assignment separate at the same time.

Here are some git commands that will be helpful.

Advanced Assignment Submission

Submission for the advanced assignment is similar to the basic assignment, except the advance component is given to a separate assignment name: asst3_adv. Again, you need to generate a bundle based on your repository. Note: Our marking scripts will switch to the asst3_adv branch prior to testing the advanced assignment.

Submit your solution

% cd ~
% give cs3231 asst3_adv asst3_adv.bundle

You're now done.