GDB and OS/161

This page is deprecated and only here as a historical record. DO NOT USE.

This page contains a short tutorial on using GDB with OS161.

Setting up GDB

Every time you start GDB you will need to tell it the location of your source and how to communicate with System/161. This can become tedious, so we create a shortcut.

Place the following (adjusted for your setup, of course) into your root directory, usually ~/cs3231/root in a file called .gdbinit.

set can-use-hw-watchpoints 0
define connect
dir ~/cs3231/asst0-src/kern/compile/ASST0
target remote unix:.sockets/gdb
b panic
end
Whenever you start GDB in this directory, you can type connect and the above commands will be run. Note that we also set a breakpoint at the panic function — whenever the kernel panics the debugger will be entered. Very useful.

Note: You may need to add the following to the separate file ~/.gdbinit, if you see a warning regarding auto loading.

set auto-load safe-path /

An Example

Consider the following session based on a (hypothetical) buggy kernel. We wish to find the bug, so we start sys161 with the -w flag, which tells sys161 to wait for GDB. We get the following:
~/cs3231/root$ sys161 -w kernel 
sys161: System/161 release 1.1, compiled Jul 28 2003 17:28:51
sys161: Waiting for debugger connection...
In another terminal, we have changed the directory to the root directory and run GDB. We run the connect command to setup GDB, and then we can let sys161 continue (the c command).
~/cs3231/root$ os161-gdb kernel 
GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=mips-elf"...
(gdb) connect
__start () at ../../arch/mips/mips/start.S:24
24      ../../arch/mips/mips/start.S: No such file or directory.
Current language:  auto; currently asm
Breakpoint 1 at 0x80010c94: file ../../lib/kprintf.c, line 94.
(gdb) c
Continuing.
In the terminal running sys161 we see the following output:
sys161: New debugger connection

OS/161 base system version 1.08
Copyright (c) 2000, 2001, 2002, 2003
   President and Fellows of Harvard College.  All rights reserved.

Put-your-group-name-here's system version 0 (ASST0 #3)

Cpu is MIPS r2000/r3000
344k physical memory available
Device probe...
lamebus0 (system main bus)
emu0 at lamebus0
ltrace0 at lamebus0
ltimer0 at lamebus0
hardclock on ltimer0 (100 hz)
beep0 at ltimer0
rtclock0 at ltimer0
lrandom0 at lamebus0
random0 at lrandom0
lhd0 at lamebus0
lhd1 at lamebus0
lser0 at lamebus0
con0 at lser0
pseudorand0 (virtual)

panic: Fatal exception 3 (TLB miss on store) in kernel mode
panic: EPC 0x800197c4, exception vaddr 0x0
The kernel has hit a bug and panicked! The kernel tells us that it has taken a TLB miss on store in kernel mode, which means that some kernel code has written to an invalid address. The second line tells us that the address of the faulting instruction is 0x800197c4 and the address the instruction was trying to access is 0x0.

Luckily, we set GDB to break whenever the panic function was invoked, so in our GDB terminal we see the following:

Breakpoint 1, panic (fmt=0x80023270 "I can't handle this... I think I'll just die now...\n") at ../../lib/kprintf.c:94
94              if (evil==0) {
Current language:  auto; currently c
At this point we would like to know where the exception occurred. There are two ways of doing this: using the list command or the frame command.

The list command is useful for finding the line of source that contains the faulting instruction (note the *):

(gdb) list *0x800197c4
0x800197c4 is in kmain (../../main/main.c:164).
159     kmain(char *arguments)
160     {
161         char *bad_ptr = NULL;
162         boot();
163         
164         *bad_ptr = 0;
165
166         menu(arguments);
167
168         /* Should not get here */
In this case it is pretty easy to see what happened --- the bad_ptr variable was dereferenced without being initialised to a valid memory location.

Remember: this is a fictional example; your assignment 0 won't look the same.

If we wanted to examine the state of the program, we would use the where and frame commands:

(gdb) where
#0  panic (fmt=0x80023270 "I can't handle this... I think I'll just die now...\n") at ../../lib/kprintf.c:94
#1  0x8000cfbc in mips_trap (tf=0x80029f38) at ../../arch/mips/mips/trap.c:197
#2  0x8000bbb0 in common_exception () at ../../arch/mips/mips/exception.S:211
#3  0x800197c4 in kmain (arguments=0x80028af4 "") at ../../main/main.c:164
#4  0x8000c7e8 in __start () at ../../arch/mips/mips/start.S:163
We can see the functions that led to this exception: __start called kmain which took an exception, causing common_exception to be called and then so on down to panic.

We would like to know the line that caused the exception, and we would also like to examine the program's variables. To do this, we use the frame command, telling it that we would like to examine the frame associated with kmain, in this case frame 3 (the number next to kmain in the above output).

(gdb) frame 3
#3  0x800197c4 in kmain (arguments=0x80028af4 "") at ../../main/main.c:164
164         *bad_ptr = 0;
Looking at the above output, it seems that the store exception was caused by the store to bad_ptr. To make sure, we can get the value of bad_ptr using the print command (we can shorten this to p).
(gdb) p bad_ptr
$1 = 0x0
We have found the culprit! The kernel has tried to store to the memory pointed to by bad_ptr, however the location is invalid (0x0).

Watch Points

Sometimes bugs are not as obvious as in the previous example. We would like the ability to break into the debugger whenever a certain variable is modified. In GDB this is done with the watch command.

We start as before, debugging a buggy kernel:

(gdb) connect
__start () at ../../arch/mips/mips/start.S:24
24	../../arch/mips/mips/start.S: No such file or directory.
Current language:  auto; currently asm
Warning: /import/paulaner/2/sjw/work/cs3231_03s2/source/os161-1.08/kern/compile/ASST0: No such file or directory.
Breakpoint 1 at 0x80010c94: file ../../lib/kprintf.c, line 94.
(gdb) c
Continuing.

Breakpoint 1, panic (fmt=0x800232c0 "I can't handle this... I think I'll just die now...\n") at ../../lib/kprintf.c:94
94		if (evil==0) {
Current language:  auto; currently c
(gdb) where
#0  panic (fmt=0x800232c0 "I can't handle this... I think I'll just die now...\n") at ../../lib/kprintf.c:94
#1  0x8000cfbc in mips_trap (tf=0x80029f40) at ../../arch/mips/mips/trap.c:197
#2  0x8000bbb0 in common_exception () at ../../arch/mips/mips/exception.S:211
#3  0x80019808 in kmain (arguments=0x80028b58 "") at ../../main/main.c:173
#4  0x8000c7e8 in __start () at ../../arch/mips/mips/start.S:163
(gdb) frame 3
#3  0x80019808 in kmain (arguments=0x80028b58 "") at ../../main/main.c:173
173		*good_ptr = 1;
(gdb) p good_ptr
$1 = (int *) 0x0
So far, so good. However, the cause of the bug isn't apparent. From looking at the code it seems that something is changing good_ptr between lines 171 and 173.
(gdb) list *0x80019808
0x80019808 is in kmain (../../main/main.c:173).
168	{
169		boot();
170	
171		good_ptr = &some_int;
172		do_something();
173		*good_ptr = 1;
174	
175		menu(arguments);
176	
177		/* Should not get here */
We will use watchpoints to tell us when good_ptr changes. Unfortunately, watchpoints in system 161 can be very slow, so we would like to make sure that we only use watch points when we know something is going to break.

We start as before, but this time break at kmain, both to check the value of good_ptr and to set the watchpoint. Note the use of the next command to step over the uninteresting boot() function.

(gdb) break kmain
Breakpoint 5 at 0x800197d8: file ../../main/main.c, line 169.
(gdb) c
Continuing.

Breakpoint 5, kmain (arguments=0x80028b58 "") at ../../main/main.c:169
169		boot();
Current language:  auto; currently c
(gdb) n
171		good_ptr = &some_int;
(gdb) p good_ptr
$2 = (int *) 0x0
(gdb) s
172		do_something();
(gdb) p good_ptr
$3 = (int *) 0x80026c10
(gdb) p &some_int
$4 = (int *) 0x80026c10
At this point, good_ptr is as you would expect --- it points to some_int. We now know that something changes good_ptr in do_something(), so we set a watchpoint and continue.
(gdb) watch good_ptr
Watchpoint 6: good_ptr
(gdb) c
Continuing.
Watchpoint 6: good_ptr

Old value = (int *) 0x80026c10
New value = (int *) 0x0
do_something () at ../../main/main.c:160
160	}
Sure enough, the watchpoint has been tripped: the do_something() function has changed the value of good_ptr to NULL.
(gdb) list
155	
156	
157	static void do_something(void)
158	{
159		good_ptr = NULL;
160	}
161	
162	/*
163	 * Kernel main. Boot up, then fork the menu thread; wait for a reboot
164	 * request, and then shut down.

Other Commands

Apart from the above commands, the following commands are useful:

For those who prefer to use a GUI, try out ddd. However we provide no support for it.

% ddd -debugger os161-gdb kernel