At 9:27 AM +1000 5/29/10, Paul Jacobson wrote:
>
>
>
>On 29/05/2010, at 5:13 AM, Rob Danielson wrote:
>
>> Tascam HD-P2
>> and the Tascam DR-680 recorders using the same mics plus a Rode
>> NT1-A. Consistent with Raimund's measurements, the differences are
>> largely if not completely masked by the self-noise of the mics.
>
>Hi Rob,
>
>I know this is beyond your hearing range but there is a very audible
>electronic clicking or "tinkling" in the DR680 clips which is
>roughly between 12khz and 12.5khz. I was unable to isolate a
>specific frequency and needed to use a low q on the filter to
>eliminate the ticking. It is less apparent with the 4042 but very
>clearly audible in the 3032 clip. This noise is not audible in the
>HDP2 clips.
>
>cheers
>Paul
>
Hi Paul--
Paul did other takes with the 3032's->DR-680 he could look at for
recurrence. Are you getting it to show in a sonogram we can send
him? If not, I guess we'll have to see if "tinkling" in the DR680 or
in combination with the 3032 shows up again. Rob D.
--
|