Hi Felicia
It may be your cable that is not wired correctly, or faulty?
The microphone is balanced output so to wire it to a stereo 3.5mm jack plug=
you want pin 2 of the XLR going to both the tip and ring of the jack plug =
and pins 1 and 3 going to the sleeve of the jack plug. You put pin 2 of the=
XLR to the tip and ring so you get the same signal on both tracks of the M=
ZRH1 as it records in stereo.
Felicia I am not sure what part of the world you are in but this cable can =
be=A0purchased, if wiring your own is out of the question, from many differ=
ent traders like here:
http://www.micbooster.com/products/felleadsandadapt.html
I have an MZRH1 and a couple of K6's and ME66's and using the cable as outl=
ined above, it works great and the PIP power is not a problem.
The K6 module cannot be powered with plug-in power or PIP as it is often re=
ferred to, you need to use the K6 module with its battery for the ME67.
Phil
|