Yes, this is probably the dBu figure. However, the absolute input
level specification should be a negative number (for instance -70dBu)
because it is a voltage level referenced to 0.775 Vrms. Care should be
taken when comparing the specifications provided by the various
manufacturers. They often use different (and unusual) definitions for
their figures, which means that we cannot always trust them.
Raimund
--- In Lou Judson <> wrote:
>
> 744T manual states: 25 to 70 dBu mic gain or 10 - 55 in low gain mode.
> I believe the 722 is the same.
>
> <L>
> Lou Judson =95 Intuitive Audio
> 415-883-2689
>
> On Nov 25, 2006, at 2:54 PM, Raimund Specht wrote:
>
> > Unfortunately, I could not find the microphone input level
> > specification of the 722 expressed in dBu. According to the
> > manufacturers specifications, the Fostex FR2 seems to be identical to
> > the Tascam HD-P2 in this regard (both have -60dBu).
> >
> > Raimund
>
|